 RESIN BONDED CUT-OFF DISCS
Cut-off wheels are used to cut or severe materials to prescribed dimensions. Cut-off wheels compete with the shear, .the saw and flame cutting. These wheels are available with or without reinforcing; the need for reinforcing depends upon the severity of the operation.
Cut-off (Reinforced)
Cut-off wheels containing one or two strengthening fabric or filaments incorporated throughout the entire diameter are referred to as "Reinforced wheels" Reinforced wheels are designed to resist breakage caused by severe cross bending. All portable cut-off,swing frame, locked head push through, and foundry chop stroke operations require reinforced cut-off wheels. In addition, a reinforced cut-off wheel is required on any operation where the grinding machine is hand guided or where the work is not securely clamped. Wheels are straight configuration with diameters usually ranging form 75mm to 500mm. The wheel thickness is determined by grit size, construction and wheel diameter; however, maximum thickness is less than 6mm.
Resin Bonded Cut-Off Discs Products
|
|
| A30 Q4 BF SINGLE NET |
METAL |
| General-purpose discs for all cutting work on steel and cast, medium-hard made of normal grade A=NK corundum for an optimized ratio between cutting performance and disc life. |
| More Detail |
|
|
| A30 Q4 BF DOUBLE NET |
METAL |
| General-purpose discs for all cutting work on steel and cast, medium-hard made of normal grade A=NK corundum for an optimized ratio between cutting performance and disc life. |
| More Detail |
|
|
| C30 Q4 BF DOUBLE NET |
MASONRY |
| General-purpose discs for all cutting work on masonry, medium-hard made of normal grade Silicon Carbide corundum for an optimized ratio between cutting performance and disc life. |
| More Detail |
|
|
| WA60 P4 BF2 Thin Style |
STAINLESS STEEL |
| General-purpose discs for all cutting work on stailless steel, medium-hard made of normal grade WA corundum for an optimized ratio between cutting performance and disc life. |
| More Detail |
|
|
| ZA36 Q BF |
METAL |
| General-purpose discs for all cutting work on steel and cast, medium-hard made of normal grade ZA corundum for an optimized ratio between cutting performance and disc life. |
| More Detail |
|
|
